Skip to main content

Server model with eight 2.5-inch hot-swap drives

Use this section to understand the internal cable routing for the server model with eight 2.5-inch hot-swap drives.

The following illustration shows the cable routing for the server model with eight 2.5-inch hot-swap drives.
Figure 1. Cable routing for the server model with eight 2.5-inch hot-swap drives
Cable routing for the server model with eight 2.5-inch hot-swap drives

CableFromTo
1 Power cablePower connector on the backplaneBackplane power connector on the system board
2 SAS signal cable*SAS 0 and SAS 1 connectors on the backplaneHBA/RAID adapter:

  • Gen 3: C0C1

  • Gen 4: C0

Note
*When Gen 4 HBA/RAID adapter is installed, ensure you use Gen 4 SAS signal cable (ThinkSystem SR530/SR570/SR630 2.5" SAS/SATA 8-Bay X40 RAID Cable Kit).