Passa al contenuto principale

FQXSFPU4091G : UEFI extra setting [arg1] value is changed from [arg2] to [arg3] after updating UEFI to [arg4].

UEFI extra setting [arg1] value is changed from [arg2] to [arg3] after updating UEFI to [arg4].

Parameters​

[arg1] UEFI extra setting name specified in the exposure config file which is imported by end user.

[arg2] UEFI extra setting previous value in Redfish format.

[arg3] UEFI extra setting current value in Redfish format.

[arg4] UEFI current build ID after updating UEFI.

This message is reported when the value of the UEFI extra setting is not kept after a UEFI firmware update. The possible reason is that the value is dropped in the new UEFI version or the value is controlled by one or more Lenovo normal settings.

Severity​

Warning

User Action​

Complete the following steps:

  1. Check if the previous value is still supported by the new UEFI version. If the new value is not expected, then modify the value to the new expected one through out-of-band (OneCLI or Redfish).
  2. Check if the UEFI extra setting is controlled by any UEFI normal settings. If yes and you do not want to keep the UEFI extra setting exposed to out-of-band, do one of the following:
    1. Delete the exposure config file if all extra settings are not expected to be exposed to out-of-band.
    2. Collect Service Data logs and contact Lenovo Support to provide a new exposure config file if partial extra settings are not expected to be exposed to out-of-band.