Skip to main content

FQXSPSE4007I : Security: Userid: [arg1] using [arg2] had [arg3] login failures from an SSH client at IP address [arg4].

Security: Userid: [arg1] using [arg2] had [arg3] login failures from an SSH client at IP address [arg4].

This message is for the use case where a user has failed to log in to a Management Controller from SSH.

Severity​

Info

Alert Category​

System - Remote Login

Serviceable​

No

CIM Information​

Prefix:IMM

and ID:0041

SNMP Trap ID​

30

Automatically Notify Support​

No

User Action​

Complete the following steps until the problem is solved:

  1. Make sure that the correct login ID and password are being used.
  2. Have the system administrator reset the login ID or password.