FQXSPIO0013N : A Fatal Bus Error has occurred on bus [SensorElementName].
A Fatal Bus Error has occurred on bus [SensorElementName].
This message is for the use case when an implementation has detected a Bus Fatal Error.
Critical - Other
SNMP Trap ID
Automatically Notify Support
Complete the following steps until the problem is solved:
- Check Lenovo Support (http://support.lenovo.com/) for an applicable service bulletin or firmware update for the system or adapter that applies to this error.
- Upgrade all system firmware and chassis firmware (if applicable) to the latest level.NoteIf the device is part of a cluster solution, verify that the latest level of code is supported by the cluster solution before the update.
- If the problem persists, collect service data log from the XCC WebGUI and contact Lenovo Support.