8i/16i RAID/HBA adapter (support Tri-mode)

This section provides cable routing information for configuration (two 8 x 2.5-inch AnyBay front drive backplanes) with one 16i RAID/HBA adapter or two 8i RAID/HBA adapters.

One 16i RAID/HBA adapter​

Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n

Note

The illustration below uses one 16i RAID/HBA adapter as an example, and cable routing for using two 8i RAID/HBA adapters is similar.

Figure 1. Signal cable routing

From	To
1 BP 1: SAS	1 Gen 4 16i adapter: C0 Gen 4 8i adapter: C0
2 BP 2: SAS	2 Gen 4 16i adapter: C1 Gen 4 8i adapter: C0