Skip to main content

Parts list

Identify each of the components that is available for your server with the parts list.

For more information about ordering parts:
  1. Go to Lenovo Data Center Support and navigate to the support page for your server.

  2. Click Parts.

  3. Enter the serial number to view a listing of parts for your server.

It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner before purchasing any new parts.

Note
Depending on the model, your server might look slightly different from the illustration. Some parts are available only on some models.
Figure 1. Server components
Server components
The parts listed in the following table are identified as one of the following:
  • Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.

  • Tier 2 customer replaceable unit (CRU): You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.

  • Field replaceable unit (FRU): FRUs must be installed only by trained service technicians.

  • Consumable and Structural parts: Purchase and replacement of consumable and structural parts (components, such as a filler or bezel) is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.

Table 1. Parts list
IndexDescriptionTier 1 CRUTier 2 CRUFRUConsumable and Structural part
For more information about ordering parts:
  1. Go to Lenovo Data Center Support and navigate to the support page for your server.

  2. Click Parts.

  3. Enter the serial number to view a listing of parts for your server.

1Top cover   
2Power supply unit   
3Riser 1 or riser 2 cage (3FH)   
4PCIe adapter   
5Riser 1 or riser 2 adapter (3FH)   
6OCP module   
7RAID flash power module   
8System fan   
9Intrusion switch   
10System fan cage   
11Right rack latch with front I/O module   
12Standard right rack latch   
13Left rack latch with VGA   
14Standard left rack latch   
15Left rack latch with VGA and external diagnostics ports   
16External diagnostics handset   
17Chassis   
18Security bezel   
19Front I/O module with front operator panel   
203.5-inch drive filler   
213.5-inch drive   
222.5-inch drive   
232.5-inch drive fillers (1-bay, 4-bay, or 8-bay)   
24Front 8 x 2.5-inch drive backplane   
25Front 12 x 3.5-inch drive backplane   
26CMOS battery   
27Rearwall bracket C1   
28Rearwall bracket B1   
29Rearwall bracket A1   
30Standard air baffle   
31Air baffle filler for standard air baffle   
322U standard heat sink   
33T-shape performance heat sink   
34Processor   
35Processor board   
36System I/O board   
37Firmware and RoT security module   
38PIB   
39Memory module   
40Fan board   
41MicroSD card