Front + rear backplanes: One 24 x 2.5 SAS/SATA expander + one 4 x 2.5 AnyBay
This section provides cable routing information for configuration (one 24 x 2.5-inch SAS/SATA expander front drive backplane and one 4 x 2.5-inch AnyBay rear drive backplane) with one 8i RAID/HBA adapter.
8i RAID/HBA adapter
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Figure 1. Signal cable routing
| From | To |
|---|---|
| 1 Front backplane: SAS 0 | 1 8i adapter:
|
| 2 Front backplane: SAS 1 | 2 Rear backplane: SAS |
| 3 Onboard: PCIe 7, 8 | 3 Rear backplane: NVMe 0-1, 2-3 |
Give documentation feedback