12 x 3.5" SAS/SATA + 4 x 3.5"/4 x 2.5" SAS/SATA
This topic provides cable routing information for the front 12 x 3.5-inch SAS/SATA + middle 4 x 3.5-inch/4 x 2.5-inch SAS/SATA configuration with one 16i RAID/HBA adapter.
The following uses the 4 x 3.5-inch SAS/SATA middle backplane as an example for illustration. The cable routing for the 4 x 2.5-inch SAS/SATA middle backplane is similar.
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Figure 1. Front/Middle backplane signal cable routing | Figure 2. Middle backplane power cable routing | ||
From | To | From | To |
1 Backplane 1: SAS 0, SAS 1 | 1 16i adapter
| 1 Backplane 5: PWR | 1 Onboard:
|
2
| 2 16i adapter
|
Give documentation feedback