32i RAID adapter
The following shows the cable connections for the front 12 x 3.5-inch SAS/SATA + middle 4 x 3.5-inch SAS/SATA + rear 4 x 3.5-inch SAS/SATA configuration with one 32i raid adapter.
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Figure 1. Front/Rear backplane signal cable routing | Figure 2. Rear backplane power cable routing | ||
From | To | From | To |
1 Backplane 1: SAS 0, SAS 1 | 1 32i adapter
| 1 Backplane 5: PWR | 1 Onboard:
|
2
| 2 32i adapter
| 2 Backplane 4: PWR | 2 Riser 2: PWR1, PWR2 |
3 Backplane 5: SAS | 3 32i adapter
|
Give documentation feedback