Skip to main content

Parts list

Use the parts list to identify each of the components that are available for your server.

Use the parts list section to identify each of the components that are available for your server. The parts are identified as one of the following:
  • Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.

  • Tier 2 CRU: You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.

  • Field replaceable unit (FRU): FRUs must be installed only by trained service technicians.

  • Consumable and structural parts: Purchase and replacement of consumable and structural parts is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.

Note

Depending on the model, your server might look slightly different from the illustration. Some parts are available only on some models. For more information about ordering the parts, go to: Parts list

It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner before purchasing any new parts.


Graphic showing all parts associated with the server

Table 1. Parts list
IndexDescriptionTier 1 CRUTier 2 CRUFRUConsumable and structural parts
1Top cover   
2GPU filler   
3Add-on GPU air baffle   
4GPU air baffle   
5Standard air baffle   
6Standard heat sink   
7Performance heat sink (T-shape)   
8Processor   
9Fan module   
10Fan cage   
11Riser 1/2 assembly, 3 FH   
12PCIe adapter   
13Riser 1 assembly, 7mm + 2 FH slots   
14Riser 2 assembly, 1FH   
15Riser 2 assembly, 7mm   
16Riser 3 assembly, 2FH   
17Riser 2 filler, 1FH   
18Rearwall bracket A1   
19Rearwall brackets B1/B2   
20Rearwall bracket C1/C2   
21OCP 3.0 Ethernet adapter   
22Intrusion switch cable   
23Chassis   
24Rack latch (with integrated front I/O)   
25Standard rack latch   
26Front I/O assembly with LCD diagnostics panel   
27Security bezel   
281 x 3.5-inch drive bay filler   
294 x 3.5-inch drive bay filler   
303.5-inch HDD   
311 x 2.5-inch drive bay filler   
324 x 2.5-inch drive bay filler   
332.5-inch HDD/SSD   
347mm SSD filler   
357mm SSD   
367mm drive backplanes (top+bottom)   
37M.2 adapter   
38M.2 retainer clip   
39M.2 drive   
408 x 2.5-inch front drive backplane   
418 x 3.5-inch front drive backplane   
4212 x 3.5-inch front drive backplane   
432 x 3.5-inch rear drive backplane   
448 x 2.5-inch rear drive backplane   
454 x 2.5-inch rear/middle drive backplane   
464 x 3.5-inch rear/middle drive backplane   
472 x 3.5-inch rear drive cage (BP4)   
484 x 3.5-inch rear drive cage (BP4)   
494 x 2.5-inch rear drive cage (BP4)   
508 x 2.5-inch rear drive cage (BP4)   
514 x 3.5-inch middle drive cage (BP5)   
528 x 2.5-inch middle drive cage (BP5, BP6)   
53System board   
54RAID super capacitor holder   
55RAID super capacitor module   
56Memory module   
57Power supply unit   
58Power supply unit filler   
59TPM adapter (for Chinese Mainland only)   
60CMOS battery (CR2032)