Parts list
Use the parts list to identify each of the components that are available for your server.
Depending on the model, your server might look slightly different from the illustration. Some parts are available only on some models. For more information about ordering the parts, go to: Parts list
It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner before purchasing any new parts.
T1: Tier 1 customer replaceable unit (CRU). Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.
T2: Tier 2 customer replaceable unit (CRU). You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.
F: Field replaceable unit (FRU). FRUs must be installed only by trained service technicians.
C: Consumable and Structural parts. Purchase and replacement of consumable and structural parts (components, such as a filler or bezel) is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.
Description | Type | Description | Type |
---|---|---|---|
1 Top cover | T1 | 31 1 x 2.5-inch drive bay filler | C |
2 GPU filler | C | 32 4 x 2.5-inch drive bay filler | C |
3 Add-on GPU air baffle | T1 | 33 2.5-inch HDD/SSD | T1 |
4 GPU air baffle | T1 | 34 7mm SSD filler | C |
5 Standard air baffle | T1 | 35 7mm SSD | T1 |
6 Standard heat sink | F | 36 7mm drive backplanes (top+bottom) | T2 |
7 Performance heat sink (T-shape) | F | 37 M.2 adapter | F |
8 Processor | F | 38 M.2 retainer clip | T2 |
9 Fan module | T1 | 39 M.2 drive | F |
10 Fan cage | T1 | 40 8 x 2.5-inch front drive backplane | T1 |
11 Riser 1/2 assembly, 3 FH | T1 | 41 8 x 3.5-inch front drive backplane | T1 |
12 PCIe adapter | T1 | 42 12 x 3.5-inch front drive backplane | T1 |
13 Riser 1 assembly, 7mm + 2 FH slots | T1 | 43 2 x 3.5-inch rear drive backplane | T1 |
14 Riser 2 assembly, 1FH | T1 | 44 8 x 2.5-inch rear drive backplane | T1 |
15 Riser 2 assembly, 7mm | T1 | 45 4 x 2.5-inch rear/middle drive backplane | T1 |
16 Riser 3 assembly, 2FH | T1 | 46 4 x 3.5-inch rear/middle drive backplane | T1 |
17 Riser 2 filler, 1FH | C | 47 2 x 3.5-inch rear drive cage (BP4) | T1 |
18 Rearwall bracket A1 | T1 | 48 4 x 3.5-inch rear drive cage (BP4) | T1 |
19 Rearwall brackets B1/B2 | T1 | 49 4 x 2.5-inch rear drive cage (BP4) | T1 |
20 Rearwall bracket C1/C2 | T1 | 50 8 x 2.5-inch rear drive cage (BP4) | T1 |
21 OCP 3.0 Ethernet adapter | T1 | 51 4 x 3.5-inch middle drive cage (BP5) | T1 |
22 Intrusion switch cable | T1 | 52 8 x 2.5-inch middle drive cage (BP5, BP6) | T1 |
23 Chassis | F | 53 System board | F |
24 Rack latch (with integrated front I/O) | T1 | 54 RAID super capacitor holder | C |
25 Standard rack latch | T1 | 55 RAID super capacitor module | T1 |
26 Front I/O assembly with LCD diagnostics panel | T1 | 56 Memory module | T1 |
27 Security bezel | T1 | 57 Power supply unit | T1 |
28 1 x 3.5-inch drive bay filler | C | 58 Power supply unit filler | C |
29 4 x 3.5-inch drive bay filler | C | 59 TPM adapter (for Chinese Mainland only) | F |
30 3.5-inch HDD | T1 | 60 CMOS battery (CR2032) | C |