Skip to main content

Remove a super capacitor module from the air baffle

Use this information to remove a super capacitor module from the air baffle.

About this task

Attention

  • Read Installation Guidelines to ensure that you work safely.

  • Power off the server and disconnect all power cords for this task.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.

Procedure

  1. Remove the top cover. See Remove the top cover.
  2. Disconnect the cable of the RAID super capacitor module.
  3. Remove the super capacitor module from the air baffle.
    Figure 1. Super capacitor module removal
    Remove a super capacitor module from the air baffle.

    1. Open the retention clip on the holder of the super capacitor module.
    2. Take the super capacitor module out of the holder.

After you finish

If you are instructed to return the old RAID super capacitor module, follow all packaging instructions and use any packaging materials that are provided.

Demo video

Watch the procedure on YouTube