Skip to main content

Remove the power distribution board

Follow instructions in this section to remove the power distribution board.

About this task

Attention

Procedure

  1. Prepare your server.
    1. Remove the top cover. See Remove the top cover.
    2. Remove all of the power supply units. See Remove a power supply unit.
    3. SXM GPU Model only: Disconnect the sideband cable between the power distribution board and the SXM GPU power distribution board. Then, remove the GPU power distribution board. See Remove the SXM GPU power distribution board.
  2. Remove the power distribution board from the server.
    Figure 1. Removing the power distribution board
    Removing the power distribution board
    1. Remove the three screws from the power distribution board.
    2. Lift the power distribution board out of its connector.

After you finish

  • Install a replacement unit. See Install the power distribution board.

  • If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Demo video

Watch the procedure on YouTube