FQXSPOS4002I : Watchdog [arg1] Failed to Capture Screen.
Watchdog [arg1] Failed to Capture Screen.
This message is for the use case where an operating system error has occurred and the screen capture failed.
System - other
SNMP Trap ID
Automatically Notify Support
Important: Some cluster solutions require specific code levels or coordinated code updates. If the device is part of a cluster solution, verify that the latest level of code is supported for the cluster solution before you update the code. Complete the following steps until the problem is solved:
- Reconfigure the watchdog timer to a higher value.
- Make sure that the XCC Ethernet over USB interface is enabled.
- Reinstall the RNDIS or cdc_ether device driver for the operating system.
- Disable the watchdog.
- Check the integrity of the installed operating system.
- Update the XCC firmware.