Power cable routing
Use the section to understand the cable routing for the power cables on the system board.
Note
- Connections between connectors; 1↔1, 2↔2, 3↔3, ... n↔n
- When routing the cables, ensure that all cables are routed appropriately through the cable guides.
Based on the location, select the corresponding routing plan:
In 2U compute shuttle
Note
Make sure to route the cables through the cable guide as instructed.
Figure 1. Power cable routing
| Cable | From | To |
|---|---|---|
| 1 | Rear PCIe switch cable harness: Power cables | 1a System board: PDB_0V connector (PSU_GND) |
| 1b System board: PDB_P12V connector (PSU_P12V) |
In 8U GPU shuttle
Figure 2. Power cable routing
| Cable | From | To |
|---|---|---|
| 1 | Front PCIe switch cable harness: Power cables | PSU interposer: System board power connector (MB PWR) |
Give documentation feedback