Skip to main content

The H100/H200 GPU Model Parts list

Identify each of the components that is available for your server with the parts list.

For more information about ordering parts:
  1. Go to Lenovo Data Center Support and navigate to the support page for your server.

  2. Click Parts.

  3. Enter the serial number to view a listing of parts for your server.

It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner before purchasing any new parts.

Note
Depending on the model, your server might look slightly different from the illustration.
Figure 1. Server components
Server components
The parts listed in the following table are identified as one of the following:
  • T1: Tier 1 customer replaceable unit (CRU). Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.

  • T2: Tier 2 customer replaceable unit (CRU). You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.

  • F: Field replaceable unit (FRU). FRUs must be installed only by trained service technicians.

  • C: Consumable and Structural parts. Purchase and replacement of consumable and structural parts (components, such as a filler or bezel) is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.

Table 1. Parts list
IndexDescriptionType
For more information about ordering parts:
  1. Go to Lenovo Data Center Support and navigate to the support page for your server.

  2. Click Parts.

  3. Enter the serial number to view a listing of parts for your server.

1PCIe adapterF
2PCIe filler (single-slot)C
3PCIe riser air baffleF
4Processor air baffleF
5PCIe riserF
6MicroSD cardF
7ProcessorF
8Processor heat sinkF
9Memory moduleF
10CMOS battery (CR2032)C
11System boardF
12System I/O boardF
13Cable guideF
14M.2 driveF
15PSU cageF
16Power supply unitT1
17PSU interposerF
18Power distribution boardF
19GPU air baffleF
20Chassis lift handleF
21Chassis support bracketsF
22ChassisF
23Slide rail kitC
24Fan control boardsF
252.5-inch drive filler (1-bay)C
262.5-inch hot-swap driveT1
27FanT1
28External cableT1
Internal cableF
292.5-inch drive backplaneF
30Integrated diagnostics panelT1
318U GPU shuttleF
32PCIe switch cable harnessesF
33PCIe switch boardF
34PCIe switch board heat sinkF
35PCIe switch shuttleF
36GPU complexF
37GPU and heat sink moduleF
38GPU complex adapter plateF
392U compute shuttleF
40GPU air ductF
41HMC cardF
42GPU baseboardF