Skip to main content

Remove the power interface board

Follow instructions in this section to remove the power interface board. The procedure must be executed by a trained technician.

About this task

Attention

Procedure

  1. Remove the 2U compute shuttle. See Remove the 2U compute shuttle.
  2. Disconnect all the cables from the power interface board.
  3. Remove the power interface board.
    1. Unfasten the three screws that secure the power interface board to the 2U compute shuttle.
    2. Tilt the rear end of the power interface board with an angle to disengage it from the processor board.
    3. Remove the power interface board from the processor board.
    Figure 1. Power interface board removal
    Power interface board removal

After you finish

If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.