Skip to main content

Install the power interface board

Follow instructions in this section to install the power interface board. The procedure must be executed by a trained technician.

About this task

Attention
  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
  • Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.
Firmware and driver download: You might need to update the firmware or driver after replacing a component.

Procedure

  1. Align the power interface board with the connector on the processor board with an angle; then, carefully insert the power interface board into the connector.
  2. Lower the rear end of the power interface board into the 2U compute shuttle.
  3. Fasten the three screws to secure the power interface board.
    Figure 1. Power interface board installation
    Power interface board installation
  4. Connect the cables to the power interface board. See Power interface board cable routing for more information.

After you finish

  1. Reinstall the 2U compute shuttle. See Install the 2U compute shuttle.
  2. Complete the parts replacement. See Complete the parts replacement.