Skip to main content

FQXSFMA0052I : DIMM [arg1] has been disabled due to the error on DIMM [arg2].[arg3]

DIMM [arg1] has been disabled due to the error on DIMM [arg2].[arg3]

Parameters

[arg1] DIMM Silk Label, 1-based

[arg2] DIMM Silk Label, 1-based

[arg3] DIMM info (S/N, FRU and UDI.), e.g. "739E68ED-VC10 FRU 0123456"

This message is reported when DDRIO power failure detected.

Severity

Info

User Action

Complete the following steps:

  1. Power off the system and remove A/C power.
  2. Reseat the DIMM in the slot specified by the event message.
  3. Restore A/C power and power on the system.
  4. If the problem persists, collect Service Data logs and contact Lenovo Support.
    Note
    The solution for this error may involve a system board replacement. If TPM encryption has been enabled, back up TPM Encryption Recovery Key.