Skip to main content

Install the front operator panel

Use this procedure to install the front operator panel.

Before installing the front operator panel:

  1. Read the safety information and installation guidelines (see Safety and Installation Guidelines).

  2. Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.

To install the front operator panel, complete the following steps:

Align the panel with the slot on operator panel tray assembly, and slide it in until it clicks into place.
Figure 1. Front operator panel installation

After installing operator panel tray assembly, complete the following steps:

  1. Reinstall the operator panel tray assembly (see Install the operator panel tray assembly).