Eight 3.5-inch simple-swap drives
Use this section to understand the cable routing for server models with eight 3.5-inch simple-swap drives (software RAID).
Note
- Connections between connectors; 1↔1, 2↔2, 3↔3, ... n↔n
- When routing the cables, ensure that all cables are routed appropriately through the cable guides.
Eight SATA drives
 |  | ||
| From | To: System board | From | To: System board |
| BP1 | 1 BP 1 power connector | BP2 | 3 BP 2 power connector |
| 2 SATA 0-3 |
| ||
Six SATA drives and two SATA/NVMe drives
|  | ||
| From | To: System board | From | To: System board |
| BP1 | 1 BP 1 power connector | BP2 | 3 BP 2 power connector |
| 2 SATA 0-3 |
| ||
Give documentation feedback