Cable routing for the power supply unit
Follow the instructions in this section to learn how to do cable routing for the power supply unit (PSU).
For the system-board connector locations, see System-board connectors.
Figure 1. Cable routing for PSU
| From (PSU) | To (system board) |
|---|---|
| 1 Micro-fit to 1X15P and 1X4P Y-splitter power cable (4-pin or 8-pin SATA connector for processor power) Note An ATX 300 W PSU uses the 4-pin connector, while an ATX 500 W PSU uses the 8-pin connector. The figure above shows the 4-pin connector, which is used as an example. | 1 Processor power connector |
| 2 Micro-fit to 1X15P and 1X4P Y-splitter power cable (15-pin connector for system power) | 2 System power connector |
Give documentation feedback