Cable routing for bay 1 drive
Follow the instructions in this section to learn how to do cable routing for the drive in bay 1.
Cable routing for bay 1 drive in a configuration without bay 0 drive
Cable routing for bay 1 drive in a configuration with bay 0 drive
For the system-board connector locations, see System-board connectors.
Cable routing for bay 1 drive in a configuration without bay 0 drive
| From (bay 1 drive) | To (system board) | Cable |
|---|---|---|
| 1 Signal connector | 1 SATA 1 connector | 7pin SATA to 7pin RA SATA cable, 185 mm |
| 2 Power connector | 2 SATA power 2 connector | 4pin power cable, 300 mm/80 mm |
Cable routing for bay 1 drive in a configuration with bay 0 drive
| From (bay 1 drive) | To (system board) | Cable |
|---|---|---|
| 1 Signal connector | 1 SATA 2 connector | 7pin SATA to 7pin RA SATA cable, 185 mm |
| 2 Power connector | 2 SATA power 2 connector | 4pin power cable, 300 mm/80 mm |
Give documentation feedback