Cable routing for the RAID adapter and drives
Follow the instructions in this section to learn how to do cable routing for the RAID adapter and drives.
RAID adapter cable
For the system-board connector locations, see System-board connectors.
The break lines indicate that part of the cable is hidden in the illustration.
Figure 1. Mini SAS HD X4 Vertical to VT SATA 7P x2 + RA SATA 7P x2 cable
| 1 Connector for the RAID adapter (connector C0) | 2 Connectors for the drives |
Cable routing for two drives with the RAID adapter
| From | To | Cable |
|---|---|---|
| 1 C0 connector on the RAID adapter | 1a Bay 2 drive signal connector 1b Bay 0 drive signal connector | Mini SAS HD X4 Vertical to VT SATA 7P x2 + RA SATA 7P x2 cable, 460 mm/420 mm/440 mm/440 mm |
| 2 Bay 0 and bay 1 drive power connectors | 2 SATA power 2 connector | 4pin power cable, 300 mm/80 mm |
| 3 Bay 1 drive signal connector | 3 SATA 1 connector | 7pin SATA to 7pin RA SATA cable, 185 mm |
| 4 Bay 2 drive power connector | 4 SATA power 1 connector | 4pin power to HDD&Slim ODD, 300 mm/210 mm/120 mm |
Cable routing for three drives with the RAID adapter
| From | To | Cable |
|---|---|---|
| 1 C0 connector on the RAID adapter | 1a Bay 0 drive signal connector 1b Bay 3 drive signal connector 1c Bay 2 drive signal connector | Mini SAS HD X4 Vertical to VT SATA 7P x2 + RA SATA 7P x2 cable, 460 mm/420 mm/440 mm/440 mm |
| 2 Bay 0 and bay 1 drive power connectors | 2 SATA power 2 connector | 4pin power cable, 300 mm/80 mm |
| 3 Bay 1 drive signal connector | 3 SATA 1 connector | 7pin SATA to 7pin RA SATA cable, 185 mm |
4a Bay 3 drive power connector 4b Bay 2 drive power connector | 4 SATA power 1 connector | 4pin power to HDD&Slim ODD, 300 mm/210 mm/120 mm |
Give documentation feedback