Set drive channel status
The set driveChannel command defines how the drive channel performs.
Supported Arrays
This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.
Roles
To execute this command on an storage array, you must have the Storage Admin or Support Admin role.
Syntax
set driveChannel [(1 | 2 | 3 | 4 | 5 | 6 | 7 | 8)]
status=(optimal | degraded)
Parameters
| Parameter | Description |
|---|---|
| driveChannel | The identifier number of the drive channel for which you want to set the status. Valid drive channel values are 1 , 2 , 3 , 4 , 5 , 6 , 7 , or 8 . Enclose the drive channel number in square brackets ([ ]). |
| status | The condition of the drive channel. You can set the drive channel status to optimal or degraded . |
Notes
Use the optimal option to move a degraded drive channel back to the Optimal state. Use the degraded option when the drive channel is experiencing problems, and the storage array requires additional time for data transfers.
Give documentation feedback