Start drive channel locate
The start driveChannel locate command identifies the drive trays that are connected to a specific drive channel by turning on the indicator lights for the drive tray that is connected to the drive channel.
Supported Arrays
This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.
Roles
To execute this command on an storage array, you must have the Storage Admin role.
Context
Use the stop driveChannel locate command to turn off the indicator lights on the drive tray.
Syntax
start driveChannel [(1 | 2 | 3 | 4 | 5 | 6 | 7 | 8)] locate
Parameter
| Parameter | Description |
|---|---|
| driveChannel | The identifier number of the drive channel that you want to locate . Valid values for the identifier number for the drive channel are 1 , 2 , 3 , 4 , 5 , 6 , 7 , or 8 . Enclose the drive channel identifier number in square brackets ([ ]). |
Give documentation feedback