Show controller NVSRAM
The show controller NVSRAM command returns information about NVSRAM byte values.
Supported Arrays
This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.
Roles
To execute this command on an storage array, you must have the Storage Admin role.
Context
Syntax
show (allControllers | controller [(<span className="ph">a</span>|<span className="ph">b</span>)])
NVSRAM [hostType=<var id="GUID-CDF54208-212D-4A47-A21C-A7268EEAABDA__V1106325" className="keyword varname">hostTypeIndexLabel</var> | host="<var id="GUID-CDF54208-212D-4A47-A21C-A7268EEAABDA__V1106326" className="keyword varname">hostName</var>"]
Parameters
| Parameter | Description |
|---|---|
| allControllers | The setting to return information about both controllers in the storage array. |
| controller | The setting to return information about a specific controller in the storage array. Valid controller identifiers are a or b , where a is the controller in slot A , and b is the controller in slot B . Enclose the controller identifier in square brackets ([ ]). |
| hostType | The index label or number of the host type. Use the show storageArray hostTypeTable command to generate a list of available host type identifiers. |
| host | The name of the host that is connected to the controllers. Enclose the host name in double quotation marks (" "). |
Notes
Use the show controller NVSRAM command to show parts of or all of the NVSRAM before using the set controller command to change the NVSRAM values. Before making any changes to the NVSRAM, contact technical support to learn what regions of the NVSRAM you can modify.
Give documentation feedback