Show drive channel statistics
The show driveChannel stats command shows the cumulative data transfer for the drive channel and error information.
Supported Arrays
This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.
Roles
To execute this command on an storage array, you must have the Storage Admin role.
Context
If the controller has automatically degraded a drive channel, this command also shows interval statistics. When you use this command, you can show information about one specific drive channel, several drive channels, or all drive channels.
Syntax
show (driveChannel [(1 | 2 | 3 | 4 | 5 | 6 | 7 | 8)] |
   driveChannels [1 2 3 4 5 6 7 8] |
   allDriveChannels) stats
Parameters
| Parameter | Description |
|---|---|
| driveChannel | The identifier number of the drive channel for which you want to show information. Valid drive channel values are 1 , 2 , 3 , 4 , 5 , 6 , 7 , or 8 . Enclose the drive channel in square brackets ([ ]). Use this parameter when you want to show the statistics for only one drive channel. |
| driveChannels | The identifier numbers of several drive channels for which you want to show information. Valid drive channel values are 1 , 2 , 3 , 4 , 5 , 6 , 7 , or 8 . Enclose the drive channels in square brackets ([ ]) with the drive channel value separated with a space. Use this parameter when you want to show the statistics for more than one drive channel. |
| allDriveChannels | The identifier that selects all of the drive channels. |
Notes
None.