Skip to main content

Set host channel

The set hostChannel command defines the loop ID for the host channel.

Supported Arrays​

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.

Roles​

To execute this command on an storage array, you must have the Storage Admin role.

Commands​


    set hostChannel [<var id="GUID-E63F0833-550D-4D42-A9C0-0D78550E69B1__V1106312" className="keyword varname">hostChannelNumber</var>] 
preferredID=<var id="GUID-E63F0833-550D-4D42-A9C0-0D78550E69B1__V1106313" className="keyword varname">portID</var>;

Parameters​

ParameterDescription
hostChannel

The identifier number of the host channel for which you want to set the loop ID. Enclose the host channel identifier number in square brackets ([  ]).

Use a host channel value that is appropriate for your particular controller model. A controller tray might support one host channel or as many as eight host channels. Valid host channel values are a1 , a2 , a3 , a4 , a5 , a6 , a7 , a8 , b1 , b2 , b3 , b4 , b5 , b6 , b7 , or b8 .

preferredID The port identifier for the specified host channel. Port ID values are 0 to 127 .