Skip to main content

Network Settings

Item

Options

Description

Network Interface Port

  • Dedicated (Default)

  • Shared

Select the System Management Network Interface Port.
Note
This item is hardware-dependent. Please refer to your hardware specifications.
Burned-in MAC Address

XX-XX-XX-XX-XX-XX

 
Hostname

XCC-XXXX-XXXXXXXXXX

Change the host name. The new name should be within 1 to 63 characters.

DHCP Control

  • Static IP

  • DHCP Enabled

  • DHCP with Fallback (Default)

Configure DHCP Control or manually configure a static IP address.

  • Static IP: enter IPv4 address manually.

  • DHCP with Fallback: use static IP address if DHCP fails.

IP Address

x.x.x.x

Enter IP address in dotted-decimal notation.
Note
Message boxWhat it means
ERROR
Invalid Input Range
Ok
An invalid IP address is input.
Subnet Mask

x.x.x.x

Enter subnet mask in dotted-decimal notation.
Note
Message boxWhat it means
ERROR
Invalid Input Range
Ok
An invalid IP address is input.
Default Gateway

x.x.x.x

Enter default gateway in dotted-decimal notation.
Note
Message boxWhat it means
ERROR
Invalid Input Range
Ok
An invalid IP address is input.
IPv6

  • Enable (Default)

  • Disable

Enable/Disable IPv6 support on management port.

Local Link Address

Unknown

 
VLAN Support

  • Enable

  • Disable (Default)

Enable VLAN support to specify the 802.1q VLAN ID on the management port network device.

VLAN ID

1

VLAN ID Range is from 1-4094

Note
This item is displayed only when VLAN Support is enabled.
Advanced Settings for BMC Ethernet  
Save Network Settings 

Commit the changes to BMC. Wait for a few minutes for the changes to take effect.