Skip to main content

iSCSI Settings

On this menu, you can configure the iSCSI initiator, which allows a system to connect to iSCSI targets over a network.

Table 1. iSCSI Settings
ItemOptionsDescription
iSCSI Initiator Name

Iqn.1986-03.com.example

Worldwide unique name of the iSCSI initiator

Only the iSCSI Qualified Name (IQN) format is accepted.

Add an attempt

N/A

Configure and add an attempt.

List of Attempts
e.g.

  • Attempt 1

  • Attempt 2

Selecting any item in the list will lead to Attempt Settings

N/A

After an attempt is added, the attempt will be listed here.

The value of each attempt will be displayed as follows: MAC: XX:XX:XX:XX:XX:XX, PFA: Bus XX | Dev XX | Func XX, “iSCSI Mode”: [%s1], “Internet Protocol”: [%s1].

Note

  • The exact value will be different, depending on the attempt settings.

  • %s1 is the option name for iSCSI Mode.

  • %s2 is the setting name for Internet Protocol.

Delete Attempts

N/A

Delete one or more attempts.

Change Attempt Order

N/A

You can change the attempt order by using the +/- keys. Use the arrow keys to select an attempt and press +/- to move the attempt up/down in the attempt order list.