IPv6 Network Configuration
On the Enter Configuration Menu, press ENTER to enter the IPv6 network configuration menu.
| Item | Options | Description |
|---|---|---|
| Interface Name | N/A | Name of the network interface |
| Interface Type | N/A | Interface type of the network interface, defined in RFC1700 |
| MAC address | XX-XX-XX-XX-XX-XX | Hardware address of the network interface |
| Host address | XXXX::XXXX:XXXX:XXXX:XXXX/XX | List of host addresses, which contains the local IPv6 addresses and the corresponding prefix length information |
| Route Table | XXXX::/64>>:: | Route table of the IPv6 network stack runs on this interface |
| Gateway addresses | N/A | List of current gateway IPv6 addresses |
| DNS addresses | N/A | List of current gateway DNS addresses |
| Interface ID | N/A | The 64-bit alternative interface ID for the device. The string is colon separated. e.g. ff:dd:88:66:cc:1:2:3 |
| DAD Transmit Count | N/A | Number of consecutive neighbor solicitation messages sent while performing duplicate address detection (DAD) on a tentative address. A value of “0” (zero) indicates that duplicate address detection is not performed. |
| Policy |
| Configure the network configuration policy. |
| Advanced Configuration | N/A | Configure network settings for the interface manually, including the IP address, gateway address, and DNS server address. |
| Save Changes and Exit | N/A | Save changes and exit. |
| Item | Options | Description |
|---|---|---|
| New IPv6 address | N/A | This item can be configured only when the Policy is set to manual. Separate the IP address with blank space to configure more than one address. e.g. 2002::1/64 2002::2/64 |
| New Gateway addresses | N/A | This item can be configured only when the Policy is set to manual. Separate the IP address with blank space to configure more than one address. |
| New DNS addresses | N/A | This item can be configured only when the Policy is set to manual. Separate the IP address with blank space to configure more than one address. |
| Commit Changes and Exit | N/A | Commit changes and exit. |
| Discard Changes and Exit | N/A | Discard changes and exit. |