Skip to main content

Installing the server in a rack

Use this information to install the server in a rack

To convert the server from a tower model to a rack model, you must use a Tower-to-Rack Kit. You can then install the server in a rack cabinet. To order a Tower-to-Rack Kit for the server, contact your IBM marketing representative or authorized reseller.

Note
  1. It is not necessary to remove the following items from the tower when installing the system in a rack cabinet.
    • Front bezel
    • DVD-ROM drive
    • Tape drive
    • Front USB connector assembly
    • Operator information panel assembly
  2. After installing the system in a rack cabinet, the distance between the EIA bracket and lower bezel will be roughly 67 mm. In light of this distance, please make sure your rack cabinet door can fully close before you begin to install the system in the rack cabinet.