Completing the installation

Use this information to complete the installation.

To complete the installation, you must reinstall the bezel, reinstall the side cover, connect all the cables and, for some devices, run the Setup utility. Follow the instructions in this section.

• Replacing the bezel
  This procedure applies only to 4U server models with non-hot-swap power supplies.
• Replacing the lower bezel
  This procedure applies only to the 5U server model with hot-swap power supplies (Model name: 2582-F4x).
• Replacing the upper bezel
  This procedure applies only to the 5U server model with hot-swap power supplies (Model name: 2582-F4x).
• Replacing the side cover
  Use this information to replace the side cover.
• Connecting the cables
  Use this information to connect the cables.
• Updating the server configuration
  Use this information to update the server configuration.