Removing the bezel

Use this information to remove the bezel from the server.

To remove the bezel, complete the following steps:

1. Read the safety information that begins in Safety and Installation guidelines.
2. Turn off the server (see Turning off the server) and all attached peripheral devices. Disconnect all power cords; then, disconnect all external cables as necessary to replace the device.
3. Pull the bezel out slightly until the tabs on the right-side of the bezel disengages from the chassis and set it aside.
   
   
   
4. If you are instructed to return the front bezel, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.