Removing and replacing Tier 1 CRUs
Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged for the installation.
The illustrations in this document might differ slightly from your hardware.
- Installing drives
The followings are illustrations of the server and the location of the drive bays. Your hardware might differ, depending on the model. - Replacing a SAS/SATA HDD option
Use this information to replace a SAS/SATA HDD. - Removing an adapter
Use this information to remove an adapter. - Replacing an adapter
Use this information to replace an adapter. - Removing a RAID adapter remote battery or flash power module from the server
Use this information to remove a RAID adapter remote battery or flash power module from the server. - Replacing a RAID adapter remote battery or flash power module in the server
Use this information to replace a RAID adapter remote battery or flash power module in the server. - Removing an optional ServeRAID adapter memory module
Use this information to remove an optional ServeRAID adapter memory module. - Replacing an optional ServeRAID adapter memory module
Use this information to replace an optional ServeRAID adapter memory module. - Removing a PCI-X riser-card assembly
Use this information to remove a PCI-X riser-card assembly. - Replacing a PCI-X riser-card assembly
Use this information to replace a PCI-X riser-card assembly. - Removing the system battery
Use this information to remove the system battery. - Replacing the system battery
Use this information to replace the system battery. - Removing the front USB connector and operator information panel assembly
Use this information to remove the front USB connector and operator information panel assembly. - Replacing the front USB connector and operator information panel assembly
Use this information to replace the front USB connector and operator information panel assembly. - Removing a 2.5-inch disk drive backplane
Use this information to remove a 2.5-inch disk drive backplane. - Replacing a 2.5-inch disk drive backplane
Use this information to replace a 2.5-inch disk drive backplane. - Removing a 3.5-inch disk drive backplane
Use this information to remove a 3.5-inch disk drive backplane. - Replacing a 3.5-inch disk drive backplane
Use this information to replace a 3.5-inch disk drive backplane. - Removing a fixed power supply
Use this information to remove a fixed power supply. - Replacing a fixed power supply
Use this information to replace a fixed power supply. - Removing a hot-swap power supply
Use this information to remove a hot-swap power supply. - Replacing a hot-swap power supply
Use this information to replace a hot-swap power supply. - Removing a memory module
Use this information to remove a memory module. - Replacing a memory module
Use this information to replace a memory module. - Removing a USB embedded hypervisor flash device
Use this information to remove a USB embedded hypervisor flash device. - Replacing a USB embedded hypervisor flash device
Use this information to replace a USB embedded hypervisor flash device. - Removing the fan assembly
Use this information to remove the fan assembly from the server. - Replacing the fan assembly
Use this information to replace the fan assembly.
Give documentation feedback