Skip to main content

Replacing the bezel

Use this information to replace the bezel.

To replace the bezel, complete the following steps:

  1. Read the safety information that begins in Safety and Installation guidelines.
  2. Turn off the server (see Turning off the server) and all attached peripheral devices. Disconnect all power cords; then, disconnect all external cables as necessary to replace the device.
  3. Remove the exiting bezel (see Removing the bezel).
  4. Touch the static-protective package that contains the bezel; then, remove the bezel from the package.
  5. Insert the tabs located on the right-side of the bezel into the holes of the chassis.
  6. Rotate the bezel until its edges into position of the chassis correctly.


  7. Turn on the peripheral devices and the server.