Removing and replacing consumable parts and Tier 1 CRUs
Replacement of consumable parts and Tier 1 CRUs is your responsibility. If IBM installs a consumable part or Tier 1 CRU at your request, you will be charged for the installation.
Note
The illustrations in this document might differ slightly from your hardware.
- Removing the cover
Use this information to remove the cover. - Installing the cover
Use this information to install the cover. - Removing the microprocessor 2 air baffle
Use this information to remove the microprocessor 2 air baffle. - Installing the microprocessor 2 air baffle
Use this information to install the microprocessor 2 air baffle. - Removing the DIMM air baffle
Use this information to remove the DIMM air baffle. - Installing the DIMM air baffle
Use this information to install the DIMM air baffle. - Removing a memory module
Use this information to remove a memory module. - Installing a memory module
The following notes describe the types of DIMMs that the server supports and other information that you must consider when you install DIMMs. - Removing a hot-swap hard disk drive
Use this information to remove a hot-swap hard disk drive. - Installing a hot-swap hard disk drive
Use this information to install a hot-swap hard disk drive. - Removing a simple-swap hard disk drive
Use this information to remove a simple-swap hard disk drive. - Installing a simple-swap hard disk drive
Use this information to install a simple-swap hard disk drive. - Removing an optional DVD drive
Use this information to remove an optional DVD drive. - Installing an optional DVD drive
Use this information to install an optional DVD drive. - Removing an adapter
Use this information to remove an adapter. - Replacing an adapter
Use this information to replace an adapter. - Removing the SAS/SATA RAID riser-card assembly
Use this information to remove the SAS/SATA RAID riser-card assembly. - Installing the SAS/SATA RAID riser-card assembly
Use this information to install the SAS/SATA RAID riser-card assembly. - Removing a ServeRAID SAS/SATA controller from the SAS/SATA RAID riser card
Use this information to remove a ServeRAID SAS/SATA controller from the SAS/SATA RAID riser card. - Installing a ServeRAID SAS/SATA controller on the SAS/SATA RAID riser card
Use this information to install a ServeRAID SAS/SATA controller on the SAS/SATA RAID riser card. - Removing an optional ServeRAID adapter advanced feature key
Use this information to remove an optional ServeRAID adapter advanced feature key. - Installing an optional ServeRAID adapter advanced feature key
Use this information to install an optional ServeRAID adapter advanced feature key. - Removing a hot-swap fan assembly
Use this information to remove a hot-swap fan assembly. - Installing a hot-swap fan assembly
Use this information to install a hot-swap fan assembly. - Removing a hot-swap ac power supply
Use this information to remove a hot-swap ac power supply. - Installing a hot-swap ac power supply
Use this information to install a hot-swap ac power supply. - Removing a USB embedded hypervisor flash device
Use this information to remove a USB embedded hypervisor flash device. - Installing a USB embedded hypervisor flash device
Use this information to install a USB embedded hypervisor flash device. - Removing the virtual media key
Use this information to remove the virtual media key. - Installing the virtual media key
Use this information to install the virtual media key. - Removing the optional two-port Ethernet adapter
Use this information to remove the optional two-port Ethernet adapter. - Installing the optional two-port Ethernet adapter
Use this information to install the optional two-port Ethernet adapter. - Removing a remotely installed RAID adapter battery
Use this information to remove a remotely installed RAID adapter battery. - Installing a RAID adapter battery remotely in the server
Use this information to install a RAID adapter battery remotely in the server. - Removing the system battery
Use this information to remove the system battery. - Installing the system battery
Use this information to install the system battery.
Give documentation feedback