Removing a RAID adapter battery or flash power module holder

Use this information to remove a RAID adapter battery or flash power module holder.

If a RAID adapter battery or flash power module is installed remotely near the fan cage and you need to replace it, complete the following steps:

1. Read the safety information that begins on Safety and Installation guidelines.
2. Turn off the server and peripheral devices and disconnect all power cords; then, remove the cover (see Removing the cover).
3. Remove the RAID adapter battery or flash power module (see Removing a RAID adapter battery or flash power module).
4. Loosen the two screws from the system tray.
   Figure 1. RAID adapter battery or flash power module holder removal
   
   
5. Lift the holder up to remove it from the system tray.

If you are instructed to return the RAID adapter battery or flash power module holder, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.