Removing and replacing Tier 1 CRUs
Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged for the installation.
The illustrations in this document might differ slightly from your hardware.
- Removing hot-swap hard disk drives
Use this information to remove hot-swap hard disk drives. - Replacing hot-swap hard disk drives
Use this information to replace hot-swap hard disk drives. - Removing simple-swap hard disk drives
Use this information to remove simple-swap hard disk drives. - Replacing simple-swap hard disk drives
Use this information to replace simple-swap hard disk drives. - Removing a DVD drive
Use this information to remove a DVD drive. - Replacing a DVD drive
Use this information to replace a DVD drive. - Removing the DVD drive cable
Use this information to remove the DVD drive cable. - Replacing the DVD drive cable
Use this information to replace the DVD drive cable. - Removing a memory module
Use this information to remove a memory module. - Installing a memory module
The following notes describe the types of DIMMs that the server supports and other information that you must consider when you install DIMMs. - Removing a PCI riser-card assembly
Use this information to remove a PCI riser-card assembly. - Replacing a PCI riser-card assembly
Use this information to replace a PCI riser-card assembly. - Removing the PCI riser-card bracket from the riser card
Use this information to remove the PCI riser-card bracket from the riser card. - Replacing the PCI riser-card bracket to the riser card
Use this information to replace the PCI riser-card bracket to the riser card. - Removing an adapter
Use this information to remove an adapter. - Replacing an adapter
The following notes describe the types of adapters that the server supports and other information that you must consider when you install an adapter. - Removing a ServeRAID SAS/SATA controller
Use this information to remove a ServeRAID SAS/SATA controller. - Replacing a ServeRAID SAS/SATA controller
Use this information to replace a ServeRAID SAS/SATA controller. - Removing the ServeRAID adapter memory module
Use this information to remove the ServeRAID adapter memory module. - Replacing the ServeRAID adapter memory module
Use this information to replace the ServeRAID adapter memory module. - Removing the dual-port network adapter
Use this information to remove the dual-port network adapter. - Replacing the dual-port network adapter
You can purchase one of the following dual-port network adapters to add two additional network ports in the server. - Removing a hot-swap fan
Use this information to remove a hot-swap fan. - Replacing a hot-swap fan
Use this information to replace a hot-swap fan. - Removing a power supply
Use this information to remove a power supply. - Replacing a power supply
Use this information to replace a power supply. - Removing the hot-swap drive backplane
Use this information to remove the hot-swap drive backplane. - Replacing the hot-swap drive backplane
Use this information to replace the hot-swap drive backplane. - Removing the simple-swap drive backplate assembly
Use this information to remove the simple-swap drive backplate assembly. - Replacing the simple-swap drive backplate assembly
Use this information to replace the simple-swap drive backplate assembly. - Removing a USB embedded hypervisor flash device
Use this information to remove a USB embedded hypervisor flash device. - Replacing a USB embedded hypervisor flash device
Use this information to replace a USB embedded hypervisor flash device. - Removing the system battery
Use this information to remove the system battery. - Replacing the system battery
Use this information to replace the system battery. - Removing the bezel
Use this information to remove the bezel. - Replacing the bezel
Use this information to replace the bezel. - Removing the front USB connector assembly
Use this information to remove the front USB connector assembly. - Replacing the front USB connector assembly
Use this information to replace the front USB connector assembly. - Removing the front video connector assembly
Use this information to remove the front video connector assembly. - Replacing the front video connector assembly
Use this information to replace the front video connector assembly. - Removing the operator information panel assembly
Use this information to remove the operator information panel assembly. - Replacing the operator information panel assembly
Use this information to replace the operator information panel assembly.
Give documentation feedback