Removing the front video connector assembly

Use this information to remove the front video connector assembly.

To remove the front video connector assembly, complete the following steps:

1. Read the safety information that begins on Safety and Installation guidelines.
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables, if necessary.
3. Disconnect the cables from the front video connector.
   Figure 1. Front USB and video cables connection
   
   
4. Remove the screws from the video connector assembly.
   Figure 2. Video connector assembly screws removal
   
   
5. Pull the front video connector assembly out slightly until it disengages from the chassis and set it aside.
   Figure 3. Front video connector assembly removal