Skip to main content

Removing the bezel

Use this information to remove the bezel.

To remove the bezel, complete the following steps:

  1. Read the safety information that begins on Safety and Installation guidelines.
  2. Remove all the cables that are connected to the front of the server.
  3. Remove the screws from the bezel.
    Note
    Use the hex screw driver to remove the screws.
    Figure 1. Bezel removal
    Bezel removal
  4. Rotate the top of the bezel away from the server.
  5. Remove the operator information panel assembly (see Removing the operator information panel assembly).
If you are instructed to return the bezel, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.