Skip to main content

Removing the operator information panel assembly

Use this information to remove the operator information panel assembly.

To remove the operator information panel, complete the following steps.

  1. Read the safety information that begins on Safety and Installation guidelines.
  2. Turn off the server and peripheral devices and disconnect the power cords and all external cables, if necessary.
  3. Remove the cover (see Removing the cover).
  4. Disconnect the cable from the back of the operator information panel assembly.
    Figure 1. Operator information panel cable removal
    Operator information panel cable removal
  5. Remove the bezel (see Removing the bezel).
  6. Rotate the bezel to loosen the two screws from the bezel.
    Note
    Use the hex screw driver to remove the two screws.
    Figure 2. Operator information panel removal
    Operator information panel removal
  7. Carefully remove the assembly from the bezel.
  8. If you are instructed to return the operator information panel assembly, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.