Removing the ServeRAID adapter memory module

Use this information to remove the ServeRAID adapter memory module.

For more information about the MegaRAID, go to the "IBM MegaRAID support matrix".

To remove the ServeRAID adapter memory module, complete the following steps:

1. Read the safety information that begins on Safety and Installation guidelines.
2. Turn off the server and peripheral devices and disconnect all power cords.
3. Remove the cover (see Removing the cover).
4. Disconnect the cable from the flash power module.
   Figure 1. Cable removal
   
   
5. Remove the ServeRAID adapter memory module from the system board.
   Figure 2. ServeRAID adapter memory module removal
   
   
6. Disconnect the cable from the ServeRAID adapter memory module.
   Figure 3. Cable removal
   
   

If you are instructed to return the memory module, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.