Replacing the power paddle card

Use this information to replace the power paddle card.

1. Read the safety information that begins on Safety and Installation guidelines.
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables, if necessary.
3. Install the power paddle card in the server.
   Figure 1. Power paddle card installation
   
   
4. Install the two screws in the power paddle card.
5. Replace the power paddle card cover (see Replacing the power paddle card cover).
6. Install the cover (see Replacing the cover).
7. Reconnect the power cords and any cables that you removed.
8. Slide the server into the rack.
9. Turn on the peripheral devices and the server.