Removing and replacing Tier 1 CRUs
Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged for the installation.
The illustrations in this document might differ slightly from your hardware.
- Removing a hot-swap hard disk drive
Use this information to remove a hot-swap hard disk drive. - Replacing a hot-swap drive
Use this information to replace a hot-swap drive. - Removing a memory module
Use this information to remove a memory module. - Installing a memory module
The following notes describe the types of DIMMs that the server supports and other information that you must consider when you install DIMMs. - Removing a PCI riser-card assembly
The server comes with one riser-card assembly (with option to add one more) that each contains two to three PCI slots. - Replacing a PCI riser-card assembly
The server provides two PCI riser-card slots on the system board. - Removing the rear two hard-disk-drive kit
The server comes with one rear two hard-disk-drive kit. - Replacing the rear two hard-disk-drive kit
Use this information to replace the rear two hard-disk-drive kit on the system board. - Removing an adapter
Use this information to remove an adapter. - Replacing an adapter
Use this information to replace an adapter. - Removing the ServeRAID adapter memory module
Use this information to remove the ServeRAID adapter memory module. - Replacing the ServeRAID adapter memory module
Use this information to replace the ServeRAID adapter memory module. - Removing the dual-port network adapter
Use this information to remove the dual-port network adapter. - Replacing the dual-port network adapter
You can purchase one of the following dual-port network adapters to add two additional network ports in the server. - Removing a hot-swap fan
Use this information to remove a hot-swap fan. - Replacing a hot-swap fan
Use this information to replace a hot-swap fan. - Removing the fan bracket
To replace some components or to create working room, you might have to remove the fan bracket. - Replacing the fan bracket
Use this information to replace the fan bracket. - Removing a power supply
Use this information to remove a power supply. - Replacing a power supply
Use this information to replace a power supply. - Removing the hot-swap drive backplane
Use this information to remove the hot-swap drive backplane. - Replacing the hot-swap drive backplane
Use this information to replace the hot-swap drive backplane. - Removing the 8x1.8-inch SSD backplane assembly
Use this information to remove the 8x1.8-inch SSD backplane assembly. - Replacing the 8x1.8-inch SSD backplane assembly
Use this information to replace the 8x1.8-inch SSD backplane assembly. - Removing a USB embedded hypervisor flash device
Use this information to remove a USB embedded hypervisor flash device. - Replacing a USB embedded hypervisor flash device
Use this information to replace a USB embedded hypervisor flash device. - Removing the system battery
The following notes describe information that you must consider when remove the battery. - Replacing the system battery
The following notes describe information that you must consider when replace the system battery in the server. - Removing the front video and USB breakout cable
Use this information to remove the front video and USB breakout cable. - Replacing the front video and USB breakout cable
Use this information to replace the front video and USB breakout cable. - Removing the video and USB breakout signal cable
Use this information to remove the video and USB breakout signal cable. - Replacing the video and USB breakout signal cable
Use this information to replace the video and USB breakout signal cable. - Removing the operator information panel assembly
Use this information to remove the operator information panel assembly. - Replacing the operator information panel assembly
Use this information to replace the operator information panel assembly. - Removing the power paddle card
Use this information to remove the power paddle card. - Replacing the power paddle card
Use this information to replace the power paddle card.
Give documentation feedback