Skip to main content

Service Enablement and Port Assignment

Use the information in this topic to view or change the port numbers used by some services on the XClarity Controller.

Click Network under BMC Configuration to view or modify XClarity Controller port assignments. Complete the following fields to view or modify port assignments:
Web
The port number is 80. This field is not user-configurable.
Web over HTTPS
In this field specify the port number for Web Over HTTPS. The default value is 443.
REST over HTTPS
The port number will automatically change to the one specified in the Web over HTTPS field. This field is not user-configurable.
Remote Presence
In this field specify the port number for Remote Presence. The default value is 3900.
IPMI over LAN
The port number is 623. This field is not user-configurable.
Note
IPMI is disabled by default.
SFTP
In this field specify the port number that is used for the SSH File Transfer Protocol (SFTP). The port number is 115. This field is not user-configurable.
Note
IMM.SFTPPortControl=open is required for OneCLI in-band updates.
SSDP
The port number is 1900. This field is not user-configurable.
SSH
In this field specify the port number that is configured to access the command line interface through the SSH protocol. The default value is 22.
SNMP Agent
In this field specify the port number for the SNMP agent that runs on the XClarity Controller. The default value is 161. Valid port number values are from 1 to 65535.
LLDP
The Link Layer Discovery Protocol advertises the identity and abilities of a device that directly connects to a BMC dedicated port. The peer device is typically a networking switch port, and the peer information can include the MAC address, IP address, system name, and other data.
SNMP Traps
In this field specify the port number that is used for SNMP traps. The default value is 162. Valid port number values are from 1 to 65535.