Skip to main content

Installing the power interface board bracket

Use this information to replace the power interface board bracket.

Read the safety information in Safety and Installation guidelines.

If you are replacing a server component in the server, you need to slide the server out from the rack enclosure, turn off the server and peripheral devices, and disconnect the power cords and all external cables.

To replace the power interface board bracket, complete the following steps.

  1. Align the power interface board bracket holes with the cage holes on the server chassis.
  2. Lower the power interface board bracket into the server.
    Figure 1. Power interface board bracket installation
    power interface board bracket installation
  3. Tighten the power interface board bracket with 8 M3 screws.
  4. Reinstall the power interface board (see Installing the power interface board).
  5. Reinstall the cables (see Internal cable routing and connectors).
  6. Reinstall the fan cage (see Replacing the fan cage).
  7. Reinstall the system fan (see Replacing a system fan).
  8. Reinstall the fan cage cover (see Installing the fan cage cover).
  9. Reinstall compute node #3 and #4.
  1. Install the server into the rack enclosure and push the server into the rack until it clicks into place.
  2. Reconnect the power cords and any cables that you removed.
  3. Turn on the peripheral devices and the server.