Skip to main content

Removing a SATADOM

Use this information to remove a SATADOM.

Read the safety information in Safety and Installation guidelines.

If you are replacing a server component or installing an optional device in the server, you need to take out the node out from the rack enclosure, turn off the server and peripheral devices, and disconnect all external cables.

To remove a SATADOM, complete the following steps.

  1. Disconnect the external cables from the compute node.
  2. Remove the compute node (see Removing a compute node from a chassis).
  3. Press the latch of the SATADOM.
  4. Carefully grasp the SATADOM by its top edge or upper corners, and pull the SATADOM out of the connector.
    Figure 1. SATADOM removal
    Adapter removal

If you are instructed to return the server component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.