Removing and replacing Tier 1 customer replaceable units (CRUs)
Use this information for removing and replacing Tier 1 CRUs.
Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged for the installation.
- Removing the adapter-retention assembly
Use this information to remove the adapter-retention assembly. - Installing the adapter-retention assembly
Use this information to install the adapter-retention assembly. - Removing the bezel
Use this information to remove the bezel. - Installing the bezel
Use this information to install the bezel. - Removing the center partition
Use this information to remove the center partition. - Installing the center partition
Use this information to install the center partition. - Removing the chassis bulkhead
Use this information to remove the chassis bulkhead. - Installing the chassis bulkhead
Use this information to install the chassis bulkhead. - Removing the CMOS battery
Use this information to remove the CMOS battery. - Installing the CMOS battery
Use this information to install a CMOS battery. - Removing the compute node cover
Use this information to remove the cover from a compute node. - Installing the compute node cover
Use this information to install the compute node cover. - Removing a DIMM
Use this information to remove a dual inline memory module (DIMM). - Installing a DIMM
Use this information to install a DIMM. - Removing an eXFlash DIMM
Use this information to remove an eXFlash DIMM. - Installing an eXFlash DIMM
Use this information to install an eXFlash DIMM. - Removing a fabric connector
Use this information to remove a fabric connector. - Installing a fabric connector
Use this information to install a fabric connector. - Removing the front handle
Use this information to remove the front handle. - Installing the front handles
Use this information to install the front handle. - Removing the hard disk drive cage and backplane assembly
Use this information to remove the hard disk drive cage and backplane assembly. - Installing the hard disk drive cage and backplane assembly
Use this information to install the hard disk drive cage and backplane assembly. - Removing a hot-swap hard disk drive
Use this information to remove a hot-swap hard disk drive. The compute node has two SAS or SATA hard disk drive bays for installing hot-swap hard disk drives, such as hot-swap SAS hard disk drives. - Installing a hot-swap hard disk drive
Use this information to install a hot-swap hard disk drive. - Removing an I/O expansion adapter
Use this information to remove an I/O expansion adapter. - Installing an I/O expansion adapter
Use this information to install an I/O expansion adapter. - Removing the light path diagnostics panel
Use this information to remove the light path diagnostics panel. - Installing the light path diagnostics panel
Use this information to install the light path diagnostics panel. - Removing a scalability and performance connector
Use this information to remove a scalability and performance connector. - Installing a scalability and performance connector
Use this information to install a scalability and performance connector. - Removing a solid state drive
Use this information to remove a 1.8-inch hot-swap solid state drive (SSD). - Installing a solid state drive
Use this information to install a 1.8-inch hot-swap solid state drive (SSD). - Removing the solid state drive cage and backplane
Use this information to remove the solid state drive cage and backplane. - Installing the solid state drive cage and backplane
Use this information to install the solid state drive cage and backplane. - Removing the solid state drive mounting sleeve
Use this information to remove the solid state drive (SSD) mounting sleeve. - Installing the solid state drive mounting sleeve
Use this information to install the solid state drive (SSD) mounting sleeve. - Removing the USB flash drive
Use this information to remove the USB flash drive. - Installing the USB flash drive
Use this information to install the USB flash drive.
Give documentation feedback